- 1 Where is the stub axle located?
- 2 What is stub shaft?
- 3 What are the types of front axle?
- 4 What is a two axle vehicle?
- 5 How do stub axles work?
- 6 What causes a broken axle?
- 7 What are stub axles made from?
- 8 What is the definition of an axle?
- 9 What is a countershaft?
- 10 How does a front axle work?
- 11 What are the functions of front axle?
- 12 What is a live front axle?
- 13 How much is a axle repair?
- 14 Do front wheel drive cars have rear axles?
- 15 What is a 5 axle vehicle?
Where is the stub axle located?
Stub Axle: Stub axles are attached to the vehicle’s front wheels, with kingpins connecting these axles to the front axle.
What is stub shaft?
These bearing supported stub shafts allow side-load to the back of an engine while simultaneously preventing any load transmission back to the crankshaft. Many industrial engines do not allow side loads on their engine crank shafts (pulley applications) but this is a suitable solution to a common problem.
What are the types of front axle?
There is two types of front axles: (a) Dead front axle, and (b) Line front axle. Dead axles are those axles, which donet rotate. These axles have sufficient rigidity and strength to take the weight. The ends of front axle are suitably designed to accommodate stub axles.
What is a two axle vehicle?
The meaning of 2 axle vehicle is simply a vehicle with 2 axles, and each axle may have 1 wheel, 2 wheels. The examples of 2 axle includes bicycles, motorcycles, your child’s tricycle, ordinary cars/light trucks, and some medium duty trucks even some class 8 trucks. And also, a 3 axle vehicle has 3 axles.
How do stub axles work?
A stub axle is a sub-assembly of a front axle beam upon which the road wheel mount. Stub axle is connected to the front axle using kingpin. These stub axles turn about the kingpin, which is light drive fit in the axle beam eye, located and locked by the taper cotter pin.
What causes a broken axle?
A vehicle does not get far, or anywhere if it has a damaged drive axle. Axles are rods or shafts that connect to the drive wheels. Even though axles are built to be tough, an overloaded vehicle can sometimes crack or break an axle. Bad carrier bearings or bad potholes are other common causes of axle problems.
What are stub axles made from?
For maximum strength to weight ratio, a stub axle needs to be forged from steel. Forging will allow the stretched fibres in the steel to follow the lines that will carry load when in operation. You could start with a short round bar. Upset or spread one end to make the flange, while thinning and lengthening the shaft.
What is the definition of an axle?
1a: a pin or shaft on or with which a wheel or pair of wheels revolves. b(1): a fixed bar or beam with bearings at its ends on which wheels (as of a cart) revolve. (2): the spindle of such a beam.
What is a countershaft?
1: a mechanism used to transmit motion and power from a main driving shaft to an individual machine, typically mounted by hangers on a ceiling, and driven by one belt from the main shaft and in turn driving the machine by another belt.
How does a front axle work?
Modern front -wheel drive cars typically combine the transmission (gearbox and differential) and front axle into a single unit called a transaxle. Each half axle connects to the wheel by use of a constant velocity (CV) joint which allows the wheel assembly to move freely vertically as well as to pivot when making turns.
What are the functions of front axle?
Front Axle and Steering System Front axle carries the weight of the front part of the automobile as well as facilitates steering and absorbs shocks due to road surface variations. The front axles are generally dead axles, but are live axles in small cars of compact designs and also in case of four-wheel drive.
What is a live front axle?
A live axle is a type of beam axle in which the shaft (or, commonly, shafts connected to move as a single unit) also transmits power to the wheels; a beam axle that does not also transmit power is sometimes called a dead axle.
How much is a axle repair?
The repairs can cost you anywhere from $170 to $900 or more. It depends primarily on the kind of car you have, as the parts will range in price quite a bit. Labor costs are typically between $100 and $200, but a few cars will cost more. It just depends on how long the mechanic has to work to change out your axle.
Do front wheel drive cars have rear axles?
FWD cars dont have a rear axle, the wheels are mounted independently, there may be some situations where there is a tube there, but it will not have an axle shaft. The wheels just ride independently on bearings, they aren’t connected by an axle like in a RWD vehicle.
What is a 5 axle vehicle?
Five – Axle Single-Trailer Trucks – All five – axle vehicles consisting of two units, one of which is a tractor or straight truck power unit. Six or More Axle Single-Trailer Trucks – All vehicles with six or more axles consisting of two units, one of which is a tractor or straight truck power unit.