- 1 What is a stub axle on a car?
- 2 What are stub axles made from?
- 3 What is stub shaft?
- 4 What are the symptoms of a broken axle?
- 5 Which is the most common type of stub axle?
- 6 Does a car have 2 or 4 axles?
- 7 How do stub axles work?
- 8 What are the types of front axle?
- 9 How does a front axle work?
- 10 What is a countershaft?
- 11 What is the definition of an axle?
- 12 What does a bent axle feel like?
- 13 Does axle damage total a car?
- 14 How long do axles last?
What is a stub axle on a car?
A stub axle or stud axle is either one of two front axles in a rear wheel drive vehicle, or one of the two rear axles in a front wheel drive vehicle. In a rear wheel drive vehicle this axle is capable of angular movement about the kingpin for steering the vehicle.
What are stub axles made from?
For maximum strength to weight ratio, a stub axle needs to be forged from steel. Forging will allow the stretched fibres in the steel to follow the lines that will carry load when in operation. You could start with a short round bar. Upset or spread one end to make the flange, while thinning and lengthening the shaft.
What is stub shaft?
These bearing supported stub shafts allow side-load to the back of an engine while simultaneously preventing any load transmission back to the crankshaft. Many industrial engines do not allow side loads on their engine crank shafts (pulley applications) but this is a suitable solution to a common problem.
What are the symptoms of a broken axle?
Top Signs Your Car Needs Axle Repair Clunking Sounds. If the axle is damaged the vehicle will strain to move. Wheel Area Vibrations. Odd vibrations or an uncommon rumbling sensations coming from the area of one tire that occur as you accelerate or while cornering are good signs that there is axle damage. Car Won’t Move.
Which is the most common type of stub axle?
As The Engineers Post explains, there are four types of stub axle: Elliot: This type uses a kingpin, a yoke, and a cotter to connect to the front axle. Reverse Elliot: This type has the opposite arrangement of a standard Elliot stub axle. Lamoine: This stub axle type has an L-shaped spindle instead of a yoke- type hinge.
Does a car have 2 or 4 axles?
Most cars or standard cars have four axles or two sets of axles, which helps in rotating the wheel. A simple way to see just how many axles a car has is to look at it from the side and then count the number of wheels it has. Most cars have four tires or two sets of tires, with one in the front and then in the rear.
How do stub axles work?
A stub axle is a sub-assembly of a front axle beam upon which the road wheel mount. Stub axle is connected to the front axle using kingpin. These stub axles turn about the kingpin, which is light drive fit in the axle beam eye, located and locked by the taper cotter pin.
What are the types of front axle?
There is two types of front axles: (a) Dead front axle, and (b) Line front axle. Dead axles are those axles, which donet rotate. These axles have sufficient rigidity and strength to take the weight. The ends of front axle are suitably designed to accommodate stub axles.
How does a front axle work?
Modern front -wheel drive cars typically combine the transmission (gearbox and differential) and front axle into a single unit called a transaxle. Each half axle connects to the wheel by use of a constant velocity (CV) joint which allows the wheel assembly to move freely vertically as well as to pivot when making turns.
What is a countershaft?
1: a mechanism used to transmit motion and power from a main driving shaft to an individual machine, typically mounted by hangers on a ceiling, and driven by one belt from the main shaft and in turn driving the machine by another belt.
What is the definition of an axle?
1a: a pin or shaft on or with which a wheel or pair of wheels revolves. b(1): a fixed bar or beam with bearings at its ends on which wheels (as of a cart) revolve. (2): the spindle of such a beam.
What does a bent axle feel like?
The result is a bent axle. However, understand that you will probably feel a lot of vibration, and since the bend prevents the axle from turning smoothly, it will eventually cause damage to other components, such as the CV joint. Bent axle or damaged wheel: Often, the only sign of a bent axle is a wobble in one wheel.
Does axle damage total a car?
depends if you crashed when breaking the axle. Normally you just replace the axle and the other front-end components, that should be far less to fix than replacing most cars. A car is considered “totalled” if the cost to fix it exceeds its replacement value in the repaired state.
How long do axles last?
The good news is that CV axles in most cars are covered by the powertrain warranty, which is typically 5 years or 60,000 miles. Check your warranty brochure for details. How long do CV axles last? In many cars, if the protective boots are not broken, CV axles can last for the lifetime of the car.