- 1 What is the purpose of trunking in VLAN?
- 2 Why do we use trunking?
- 3 What is trunk allowed VLAN?
- 4 What is VLAN trunking list the benefits of VLAN trunking?
- 5 Why do we need VLANs?
- 6 What is difference between VLAN access and trunk mode?
- 7 Can two VLANs have the same IP address?
- 8 How many VLANs can you have?
- 9 How do VLANs work?
- 10 How do I allow multiple VLANs on trunk?
- 11 How do I show VLANs on a trunk?
- 12 How do I remove native VLAN from trunk?
- 13 What are three advantages of VLANs?
- 14 What are two primary benefits of using VLANs?
- 15 How do VLANs improve security?
What is the purpose of trunking in VLAN?
VLAN trunking enables the movement of traffic to different parts of the network configured as a VLAN. A trunk is a point-to-point link between two network devices that carry more than one VLAN. With VLAN trunking, you can extend your configured VLAN across the entire network.
Why do we use trunking?
The main purpose of trunking is to carry traffic between switches and maintain the VLAN information. Unlike an access link, the trunk link does not belong to a single VLAN but instead can carry traffic from several VLANs over a point-to-point link between two devices that understand the protocol.
What is trunk allowed VLAN?
the trunk – allowed VLANs list). By default, a trunk interface can carry traffic for all VLANs. To specify that only certain VLANs are allowed on the specified trunk, use the switchport trunk allowed vlan command.
What is VLAN trunking list the benefits of VLAN trunking?
VLAN trunks allow you to connect a large number of VLANs across a single link (or aggregation group). Without trunking and appropriate tagging you’d need to run a dedicated, physical link for each VLAN connection between switches (port-based VLAN ).
Why do we need VLANs?
A VLAN allows different computers and devices to be connected virtually to each other as if they were in a LAN sharing a single broadcast domain. VLANs can help reduce IT cost, improve network security and performance, provide easier management, as well as ensuring network flexibility.
What is difference between VLAN access and trunk mode?
An access port can have only one VLAN configured on the interface; it can carry traffic for only one VLAN. A trunk port can have two or more VLANs configured on the interface; it can carry traffic for several VLANs simultaneously.
Can two VLANs have the same IP address?
The OSA-Express Layer 2 implementation allows the hosts to manage IP addresses and ARP cache, so it is possible to have a single guest LAN segment (or VSWITCH segment) where two different hosts use the same IP Address on different VLAN groups.
How many VLANs can you have?
Under IEEE 802.1Q, the maximum number of VLANs on a given Ethernet network is 4,094 ( 4,096 values provided by the 12-bit VID field minus reserved values at each end of the range, 0 and 4,095).
How do VLANs work?
Virtual Local Area Networks ( VLANs ) separate an existing physical network into multiple logical networks. Thus, each VLAN creates its own broadcast domain. Communication between two VLANs can only occur through a router that is connected to both. VLANs work as though they are created using independent switches.
How do I allow multiple VLANs on trunk?
perform these steps: To restrict the traffic that a trunk carries, issue the switchport trunk vlan -list interface configuration command. To add a VLAN to the trunk, issue the switchport trunk allowed vlan add vlan -list command. This example shows how to remove VLANs 5 through 10 and 12.
How do I show VLANs on a trunk?
For traffic from a VLAN to be transmitted across a trunk, it must be allowed on the trunk. To do so, use the switchport trunk allowed vlan vlan -id command. In Figure 3-28, VLAN 20 (Student) and PC5 have been added to the network.
How do I remove native VLAN from trunk?
To configure the native VLAN ID for the virtual Ethernet interface, use the switchport trunk native vlan command. To remove the native VLAN ID from the virtual Ethernet interface, use the no form of this command.
What are three advantages of VLANs?
VLANs provide a number of advantages, such as ease of administration, confinement of broadcast domains, reduced broadcast traffic, and enforcement of security policies. VLANs provide the following advantages: VLANs enable logical grouping of end-stations that are physically dispersed on a network.
What are two primary benefits of using VLANs?
The Real Advantages of a Virtual LAN ( VLAN ) help with network efficiency by reducing extraneous traffic; enhance security by creating a virtual boundary around that business unit; improve bandwidth performance by limiting node-to-node and broadcast traffic; save workplace disruption, as there is no need to physically match up ports and switches on a network.
How do VLANs improve security?
Because VLANs support a logical grouping of network devices, they reduce broadcast traffic and allow more control in implementing security policies. Also, surveillance traffic is only available to those authorized, and bandwidth is always available, when needed.